Ultraflow 54

Ultraflow 54

Kamstrup Ultraflow is a static flow sensor based on the ultrasonic measuring principle. This principle has proven long-term stability and accuracy. The ULTRAFLOW flow sensors are available in a wide range of sizes from DN15 to DN300 and nominal flow rates from 0.6 m3/h - 1000 m3/h.

Ultraflow 54 is a static flow sensor based on the ultrasonic measuring principle. It is primarily used as a volume flow sensor for use with the Multical 602 & Mulitcal 801 calculators and has been designed for heating and cooling applications where water is the heat-bearing medium. The volume is measured using a bi-directional ultrasonic technique based on transit time.

Made of brass or stainless steel, the flow sensors are hard wearing and do not have any moving parts guaranteeing a long life time. A three-wired signal cable is used to connect the Ultraflow 54 flow sensor to the Multical calculator. This cable supplies the flow sensor and transfers the signal from the sensor to the calculator.

A signal corresponding to the flow is transmitted (number of pulses proportional to the volume flowing through the meter). The signal cable is available in 2.5m, 5m and 10m, however if longer distances are required, a Pulse Transmitter can be used.

The larger Ultraflow 54 flow sensors (DN150 - DN300) are available with internal supply if the distance between Multical and Ultraflow 54 is 10m or more.

Ultraflow 54. DN15 - DN125

Data Sheet
Installation & User Guide
Technical Description

Ultraflow 54. DN150 - DN300

Data Sheet
Installation & User Guide
Technical Description


Please contact us with your enquiry.